Canon IP2770 Blink Reset

The stylish PIXMA iP2770 combines quality and speed for easy photo printing at home. 2pl ink droplets, 4800 x 1200dpi resolution and Chromalife 100+ ensure crisp, sharp text and colour printing that lasts. 
You may have experienced an error in your Canon printer. Don’t worry, there is a solution How to Reset Canon IP2770 Error 5B00

Download canon iP2770 Restter v1074 here or with dropbox here.

Don't forget to turn off your download manager, download successful.

Enter Service Mode: iP2770

• The Printer off and the power cord attached.
• Press RESUME button 2 seconds
• Then press the POWER button until the green light turns on (when pressing the POWER button, button ... hold RESUME button)
• Then a release RESUME button, but don't loose POWER button.
• While the POWER button still depressed, press the RESUME button 4 times. The Led will turn on turns orange with green flame last green. (don't get mistaken 4 x because the printer will die miserably, but its nature while also)
• Release both buttons at the same time.
• The Led will blink briefly and then going to a GREEN flame.
• The computer will detect the new device, disregard it.
• This state of Affairs indicates printer iP2770 in SERVICE MODE and ready to be reset.

Then run the Resetter  v1074 iP2770:

• File Resetter iP2770 Extract it.
• Prepare 2 paper at the printer (to print at the time this process is reset).
• Run the program Resetter iP2770

• Click "PLAY", then the printer will be an ongoing process, then it will print one page iP2770 with inscription "D =" 000.0

• Click the "EEPROM Clear".
• Then click the "EEPROM", and the printer will print the result iP2770 Resetter. One of his writings is needed:
• "TPAGE (TTL =: credits)"

• Turn off the Printer by pressing the POWER button.
• Completed

Good luck
Canon IP2770 Blink Reset

Related Post